Bearing - 6304 2Z C3 SKF

Product detailed description

Bearing - 6304 2Z C3 SKF

6304 2Z C3 SKF is a single-row deep-groove ball bearing with dimensions of 20 × 52 × 15 mm. The 2Z execution has non-contact steel shields on both sides, while C3 denotes radial internal clearance greater than Normal.

Key features

• Design: non-separable single-row bearing for radial loads and moderate axial loads in both directions.
• 2Z shields: steel shields on both sides help retain lubricant and protect against coarser contaminants with low friction.
• C3 clearance: increased radial internal clearance provides allowance for temperature differences, higher speeds or tighter fits; it is not automatically suitable for every application.
• Dimensions: 20 mm bore, 52 mm outside diameter and 15 mm width.

Installation and use

During mounting, apply fitting force only through the ring with the interference fit and never through the balls. Do not damage the shields or wash the bearing, so the factory lubricant remains intact. Before ordering, verify the full designation 6304 2Z C3 SKF, particularly the C3 clearance requirement, speed, temperature and contamination conditions.