Bearing - 6304-C-2HRS-C3 FAG

Product detailed description

Bearing - 6304-C-2HRS-C3 FAG

6304-C-2HRS-C3 FAG is a Generation C single-row deep-groove ball bearing with dimensions of 20 × 52 × 15 mm. The 2HRS execution uses optimized nitrile-rubber contact seals on both sides, while C3 denotes radial internal clearance greater than Normal.

Key features

• Generation C: optimized FAG internal geometry supports smooth running, low friction and good operating reliability.
• 2HRS seals: contact lip seals on both sides help retain lubricant and restrict the ingress of dust and moisture.
• C3 clearance: increased radial internal clearance provides allowance for temperature differences, higher speeds or tighter fits; suitability must be assessed for the application.
• Dimensions: 20 mm bore, 52 mm outside diameter and 15 mm width.

Installation and use

Apply fitting force only through the ring with the interference fit and never through the balls. Do not damage the seals or wash the bearing, so the factory lubricant remains intact. Before ordering, verify the full designation 6304-C-2HRS-C3 FAG, particularly the C3 clearance requirement, speed, temperature and contamination conditions.