Bearing - 6305 2Z C3 GJN SKF
Related products
30x72x19 mm
Single-row 6306 2RS TIMKEN deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
25x62x17 mm
Single-row 6305 2Z ZKL deep-groove ball bearing
Metal shields on both sides; compare the complete designation, including suffixes.
35x72x27 mm
ZKL double-row angular contact ball bearing for combined radial and axial loads.
25x52x15 mm
Contact seals of synthetic rubber (NBR) on both sides. Versatile SKF deep groove ball bearing for protected arrangements.
20x32x7 mm
61804 2RS KINEX deep-groove ball bearing with rubber seals on both sides.
12x32x10 mm
Single-row 6201 C 2Z FAG deep-groove ball bearing
Metal shields on both sides; compare the complete designation, including suffixes.
5x16x5 mm
ZKL 625 bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
45x85x19 mm
ZKL 6209 K bearing with verified mounting dimensions; compare the complete K suffix before replacement.
10x26x8 mm
6000 ZR ZKL deep-groove ball bearing with a metal shield on one side.
30x60.03x37 mm
SKF double-row angular contact ball bearing with contact seals on both sides; VKBC 20081 / BA2B 246033.
17x40x12 mm
1203 DKF self-aligning ball bearing for arrangements where misalignment may occur.
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
17x47x12 mm
INA LR 203 NPPU single-row yoke type track roller with a thick-walled outer ring and lip seals on both sides.
For running on tracks and primarily radial loads; the older NPPU designation is cross-referenced as 2RSR.
10x26x8 mm
SKF 6000 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions.
10x30x9 mm
6200 2Z MSC deep-groove ball bearing with metal shields on both sides.
25x47x12 mm
Single-row 6005 2RSR FAG deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
30x62x16 mm
7206 ZKL angular-contact ball bearing for combined radial and axial loads.
17x47x14 mm
6303 2Z ZVL deep-groove ball bearing with metal shields on both sides.
17x40x12 mm
6203 2RSH C3 SKF deep-groove ball bearing with two contact seals and increased radial clearance.
17x40x12 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for versatile rotating assemblies.
25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.
20x42x12 mm
Greater C3 radial internal clearance. ZKL single-row deep groove ball bearing for arrangements requiring increased clearance.
40x60x13 mm
MGM 51108 single-direction thrust ball bearing in a separable design.
For axial load in one direction only; it does not carry radial load.
45x75x16 mm
FAG single-row deep groove ball bearing with metal shields on both sides (2Z).
17x35x10 mm
6003 2Z FLT deep-groove ball bearing with metal shields on both sides.
17x35x10 mm
ZVL 6003 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
8x22x7 mm
INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.
45x85x20.75 mm
30209 A KLF-ZVL tapered roller bearing for combined radial and axial loads.
12x28x8 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for compact rotating assemblies.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |