Bearing - 6305 2ZC3 SKF
Related products
15x32x9 mm
Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.
65x100x18 mm
ZVL 6013 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
75x110x12 mm
Open STEYR 16115 single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.
12x37x12 mm
ZKL 6301 2Z single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.
40x68x15 mm
Single-row SKF 6008 2RS deep groove ball bearing; the corresponding SKF catalogue designation is 6008-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
30x55x13 mm
ZKL 6006 2Z single-row deep-groove ball bearing with metal shields on both sides.
For radial loads and limited axial loads in either direction.
8x22x7 mm
Miniature single-row NTN 608 ZZ P6E deep groove ball bearing with metal shields on both sides. The shields help retain lubricant and protect the rolling space from larger contaminants while maintaining low friction.
Metal shield on one side
30x47x9 mm
Thin-section, single-row EZO 6906 2RS deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.
25x47x12 mm
ZKL 6005 RS single-row deep-groove ball bearing with a contact rubber seal on one side. The seal improves protection against contamination and moisture while the opposite side remains open.
40x80x18 mm
Metal shields on both sides
ZKL 6208 2Z single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
10x30x9 mm
SKF 6200 2RS single-row deep-groove ball bearing with rubber seals on both sides.
For radial loads and limited axial loads in either direction.
Rubber seals on both sides
40x90x25.25 mm
ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
25x52x15 mm
SKF 6205 2Z/C3 single-row deep-groove ball bearing with metal shields on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
8x24x8 mm
ZKL 628 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contamination.
30x62x21.25 mm
ZKL 32206 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
20x52x16.25 mm
KINEX 30304 A single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
60x130x46 mm
ZKL 22312 KW33J double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
40x80x18 mm
DPI 6208 single-row deep-groove ball bearing for reliable radial-load support together with limited axial loads in both directions.
8x28x9 mm
KBS 638 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
17x35x10 mm
ZKL 6003 Z single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
40x60x13 mm
MGM 51108 single-direction thrust ball bearing in a separable design.
For axial load in one direction only; it does not carry radial load.
30x49.25x13.6 mm
ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
10x19x5 mm
MTM 61800 2Z thin-section single-row deep-groove ball bearing with non-contact metal shields on both sides for compact arrangements, low friction and protection from ordinary contaminants.
17x40x12 mm
NSK 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |