Bearing - 6305 ZKL

9x26x8 mm

SKF 629 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A compact low-friction design for radial and limited axial loads in both directions.

35x80x32.75 mm
CRB 32307 single-row tapered roller bearing for high combined radial and axial loads. The separable inner-ring cone with rollers and outer-ring cup allow precise mounting and clearance or preload adjustment.

25x52x27.2 mm

SKF YAT 205 insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

25x47x12 mm
ZVL single-row deep groove ball bearing with rubber seals on both sides (2RS).

25x37x7 mm

Single-row SKF 61805 2RS deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.

40x68x15 mm

Single-row SKF 6008 2RS deep groove ball bearing; the corresponding SKF catalogue designation is 6008-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.

12x37x12 mm
ZKL 6301 2Z single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.

30x55x13 mm
ZKL 6006 2Z single-row deep-groove ball bearing with metal shields on both sides.
For radial loads and limited axial loads in either direction.

25x52x15 mm
Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.

40x60x13 mm
MGM 51108 single-direction thrust ball bearing in a separable design.
For axial load in one direction only; it does not carry radial load.

30x62x35.7 mm

FAG 16206 S-type bearing insert for mounting a 30 mm shaft in a suitable bearing housing. The extended inner ring with two locking screws provides straightforward and reliable shaft location.