Bearing - 6306 P63 TPX ZKL

25x52x18 mm

2205 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

40x90x33 mm

2308 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

6x19x6 mm

626 2RSR ZWICKER miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.

40x90x33 mm

2308 MGM double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

90x190x64 mm

2318 K ZKL self-aligning ball bearing has two rows of balls, a common spherical raceway in the outer ring and a tapered K bore. It accommodates angular misalignment between shaft and housing while carrying mainly radial load plus lighter axial load in both directions. It is well suited to positions where shaft deflection or alignment error cannot be fully avoided.

50x110x29.25 mm

30310 A ZKL tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

45x100x39.7 mm

3309 ZKL double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity.

25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.

50x90x20 mm

CS 210 2RS NEU insert ball bearing is a sealed bearing with a 50 mm cylindrical bore and spherical outside surface for installation in a matching housing. Double 2RS contact seals protect the rolling contact area from dust and splashed water while retaining lubricant. When replacing it, also compare the shaft-retention method and housing profile.

55x100x26,75 mm

32211 A ZKL single-row tapered roller bearing for high combined radial and one-direction axial loads.