Bearing - 6311 2Z ZKL

17x47x15.25 mm

30303 MGK tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.

45x100x25 mm

6309 2RS1 SKF deep-groove ball bearing is a single-row radial bearing with contact seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS1 design protects the internal rolling contact from contaminants and helps retain lubricant inside the bearing.

50x70x14 mm

51110 ZKL single-direction thrust ball bearing for carrying axial load in one direction; it is not designed for radial loading.

20x35x10 mm

51104 ZVL single-direction thrust ball bearing is a separable bearing designed to carry axial load in one direction. It consists of a shaft washer, housing washer and ball-and-cage assembly. It is not intended for radial loading or for accommodating misalignment.

35x72x17 mm

NJ 207 ZKL cylindrical roller bearing is a single-row radial bearing with high load capacity and rigidity. The NJ design has two guiding flanges on the outer ring and one on the inner ring, allowing it to carry radial load, locate the shaft axially in one direction and permit axial displacement in the opposite direction.

25x42x20 mm

The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.

Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.

25x47x12 mm

6005 2RS SKF deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

25x62x17 mm

6305 F-HTO SKWC GERMANY deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation before substitution.

UG 208 ER NTN insert ball bearing is designed for bearing housings with a spherical outside surface and eccentric shaft locking. Size 208 is intended for a 40 mm shaft and has an 80 mm insert outside diameter. Before replacing it, verify the complete code, shape and width dimensions against the original part because ER-design details can differ between manufacturers.

20x47x14 mm

6204 2ZNR SKF deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial retention in the housing.

40x90x33 mm

2308 MGM double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.