Bearing - 6804 2RS KBS

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

Needle roller bearing - HK 3520 IBB

35 × 42 × 20 mm. IBB needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 62206 2RS1 SKF

30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.

Bearing - YEL 209-2F SKF

Bearing.

Bearing - 6002 2Z C3 ZKL

15 × 32 × 9 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

Bearing - 30213 E ZKL

65 × 120 × 24.75 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Needle roller bearing - HK 3018 2RS INA

30 × 37 × 18 mm. INA needle roller bearing HK 3018 2RS for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Needle roller bearing - HK 1512 CRB

15 × 21 × 12 mm. CRB needle roller bearing HK 1512 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6002 2RSH SKF

15 × 32 × 9 mm. Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.