Bearing - 6906 ZZ IBB

55x78x16 mm
ZVL 51111 single-direction thrust ball bearing for purely axial loads acting in one direction; its separable design makes correct installation of the individual components easier.

17x35x10 mm

6003 2Z ZVL is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

35x72x18.25 mm

Single-row tapered roller bearing HR 30207 J NSK for combined radial and one-direction axial loads. Its precise separable construction provides high rigidity and permits adjustment of bearing clearance or preload.

10x26x8 mm

6000 Z C6 ZKL is a single-row deep-groove ball bearing with one non-contact metal shield; the opposite side remains open. The design supports radial load and moderate axial loads in both directions while maintaining low friction.

The shield helps retain lubricant and limits the entry of larger contaminants from one side. C6 is part of the complete designation and must be checked against the original bearing or ZKL documentation when selecting a replacement.

50x75x35 mm
Radial spherical plain bearing GE 50 E 2RS ZVL for oscillating motion and angular misalignment
Rubber seals on both sides; verify the complete designation and lubrication regime before ordering.

25x62x17 mm

6305 2ZR FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

80x110x30 mm

Single-row cylindrical roller bearing NU 4916 V DKF for high radial loads and accurate shaft guidance. The separable NU design permits axial displacement of the shaft relative to the housing in both directions.

35x72x18.25 mm
KINEX 30207 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.

17x47x14 mm

6303 2RS SKF is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.