Bearing - 7205 B XL 2RS TVP FAG
Product detailed description
Bearing - 7205 B XL 2RS TVP FAG
FAG 7205-B-XL-2RS-TVP – sealed angular-contact ball bearing
The FAG 7205-B-XL-2RS-TVP is a single-row angular-contact ball bearing for combined radial and axial loads. It carries axial load in one direction; a correctly arranged bearing pair is normally used for axial guidance in both directions. B identifies the higher contact-angle design, XL the X-life performance range, 2RS rubber seals on both sides and TVP a polyamide cage.
Technical data
| Designation | 7205-B-XL-2RS-TVP |
|---|---|
| Manufacturer | FAG / Schaeffler |
| Bearing type | single-row angular-contact ball bearing |
| Bore diameter d | 25 mm |
| Outside diameter D | 52 mm |
| Width B | 15 mm |
| Sealing | rubber seals on both sides (2RS) |
| Cage | polyamide (TVP) |
Application and mounting
This bearing suits spindles, pumps, gearboxes and other precision arrangements carrying combined loads. The mounting orientation must match the axial-load direction; for paired bearings follow the specified arrangement and adjustment. Apply mounting force only through the ring with the interference fit and protect the seals and polyamide cage from damage and excessive temperature.
Check before ordering
Compare the 25 × 52 × 15 mm dimensions and complete designation, including B, XL, 2RS and TVP. Open designs, other contact angles, universally matchable variants and different cage designs are not automatically interchangeable.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any FAG product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
FAG – product identification and supply
The FAG designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |