Bearing - 7306 B SKF

30x62x20 mm

Rubber seals on both sides

The 62206 2RS1 SKF deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.

6314/C3VL0241 SKF INSOCOAT ball bearing is an open single-row deep groove bearing with C3 internal clearance and an electrically insulating coating on the outer ring. It helps prevent stray current from passing through the bearing and protects against electrical erosion damage.

25x42x20 mm

The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.

Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.

25x52x15 mm

High-precision spindle ball bearing S 6205 C 18 TA UP GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C 18 TA UP design, pairing and required preload must be preserved when replacing it.

6208 2Z C3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

6214 2RS NACHI deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

6016 2ZRC3 ZVL deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides (2ZR) and greater-than-normal C3 radial clearance. It combines low friction, high-speed capability and protection of the factory lubricant against common dust.

45x85x30 mm

Double-row angular contact ball bearing 3209 ZKL for combined radial loads and axial loads in both directions. A robust solution for arrangements requiring good rigidity and accurate shaft guidance.

15x28x9 mm

Single-direction thrust ball bearing 51102 URB for axial load in one direction. The separable design comprises a shaft washer, a housing washer and a ball-and-cage assembly; the bearing is not intended for radial loads.

Deep groove ball bearing 61803 2RS IBB in a slim design with rubber seals on both sides. Suitable for compact arrangements where protection against dust and contamination is important.