Bearing - B7007 E 2RSD T P4S UL FAG
Related products
10x26x8 mm
NTN single-row deep groove ball bearing with non-contact steel shields on both sides, P6 accuracy, C3 radial clearance and electric-motor quality.
30x47x13 mm
Special INA FE04-224.61906 single-row deep groove ball bearing with contact rubber seals on both sides. Mass 0.073 kg.
Metal shields on both sides
65x120x24.75 mm
ZKL 30213 E single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
20x52x16.25 mm
KINEX 30304 A single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
12x55x11
Special neu TR55ZZ HIC0102 bearing with a 12 mm bore, 55 mm outside diameter and 11 mm width. Before ordering, compare the complete designation and the actual shielding design with the original component.
Metal shields on both sides
Greater radial internal clearance
40x80x23 mm
NU 2208 E ZVL is a single-row cylindrical roller bearing for high radial loads. The NU design permits axial displacement of the shaft relative to the housing in both directions and is suited to non-locating positions.
65x100x18 mm
ZVL 6013 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
10x19x7 mm
Compact SKF 63800 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contaminants.
Metal shields on both sides
Greater radial internal clearance
17x35x10 mm
6003 C3 ZKL is an open single-row deep-groove ball bearing with greater-than-normal C3 radial internal clearance. It suits radial and limited axial loads where operating conditions require additional internal clearance.
30x49.25x13.6 mm
ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
INA KSO20-PP is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant.
Dimensions: 20 × 32 × 45 mm.
25x47x12 mm
Open ZKL 6005 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
75x110x12 mm
Open STEYR 16115 single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.
30x47x9 mm
Thin-section, single-row NTN 6906 2RS deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
12x28x8 mm
URB 6001 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 5.1 kN, mass 0.022 kg.
25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.
30x47x9 mm
Thin-section, single-row EZO 6906 2RS deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.
35x72x17 mm
Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
17x35x10 mm
ZKL 6003 Z single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
17x35x10 mm
SKF 6003-2RSH/C3 single-row deep groove ball bearing with greater C3 radial internal clearance and NBR contact seals on both sides. It is grease filled and protected against contamination.
5x13x4 mm
Miniature single-row IBB 695 2Z deep groove ball bearing with non-contact sheet-steel shields on both sides. A compact design for small mechanisms requiring low friction and protection of the lubricant from ordinary contaminants.
50x75x35 mm
Radial spherical plain bearing GE 50 E 2RS ZVL for oscillating motion and angular misalignment
Rubber seals on both sides; verify the complete designation and lubrication regime before ordering.
25x37x7 mm
Single-row SKF 61805 2RS deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any FAG product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
FAG – product identification and supply
The FAG designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |