Bearing - BX QJ 1024 N2MA C4H SKF

50x80x20 mm

Single-row tapered roller bearing 32010 JR DPI for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.

14x22x20 mm

Needle roller bearing without inner ring NK 14/20-XL INA for high radial loads in a compact space. The 14 mm dimension is the under-roller diameter, not a conventional bore; a suitably prepared shaft surface forms the inner raceway.

70x125x31 mm

Spherical roller bearing 22214 CC SKF with a cylindrical bore for high radial loads and axial loads in both directions. Its self-aligning design accommodates misalignment and shaft deflection.

30x72x19 mm

Single-row cylindrical roller bearing NJ 306 FRB for high radial loads and axial location in one direction. The NJ design permits axial displacement of the shaft relative to the housing in the opposite direction; when replacing, compare the complete designation and required internal clearance.

45x85x30 mm

Double-row angular contact ball bearing 3209 ZKL for combined radial loads and axial loads in both directions. A robust solution for arrangements requiring good rigidity and accurate shaft guidance.

75x130x25 mm

Single-row cylindrical roller bearing NU 215 ZKL for high radial loads and accurate shaft guidance. The NU design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

60x110x22 mm

Double-row self-aligning ball bearing 1212 K ZKL with a 1:12 tapered bore. Accommodates moderate angular misalignment and shaft deflection; suitable primarily for radial load and limited axial load in both directions.

45x85x23 mm

Double-row self-aligning ball bearing 2209 E2RS1TN9 SKF with contact seals on both sides and a polyamide cage. It accommodates slight misalignment and shaft deflection and carries radial loads together with light axial loads in both directions.

40x48x20 mm

Full-complement drawn-cup needle roller bearing DL 4020 NADELLA with open ends and without an inner ring. It provides high radial load capacity within a very small radial section.

45x100x27.25 mm

31309 A FLT single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.