Bearing - GE15 GPZ

10x22x6 mm

61900 2RS KINEX single-row deep groove ball bearing with contact rubber seals on both sides. A slim sealed bearing for radial and moderate axial loads in both directions, protected against contamination and lubricant loss.

25x62x17 mm

6305 2ZR ZVL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

20x32x7 mm

61804 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

35x80x21 mm

6307 ZKL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

20x42x12 mm

6004 ZKL single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

30x72x19 mm

Single-row 6306 Z ZKL deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.

25x52x15 mm

NJ 205 ZKL single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction while allowing axial displacement in the opposite direction.

Rubber seals on both sides

20x42x16 mm

3004 2RS C3 FAG double-row angular contact ball bearing for combined radial and axial loads in both directions. The C3 version has greater axial internal clearance than standard CN.

15x35x11 mm

6202 2ZR ZKL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

15x32x9 mm

6002 2Z YUG single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.

34x64x37 mm

DAC 34640037 2RS KBS double-row ball bearing with contact rubber seals on both sides. A compact bearing for combined radial and axial loads in both directions, typically used in wheel-hub and similar precision arrangements.