Bearing - KLNJ 3/4 SKF
Product detailed description
Bearing - KLNJ 3/4 SKF
Bearing KLNJ 3/4 SKF.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 608 2RS ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Verify the complete designation before ordering.
Bearing - GE 50 E 2RS ZVL
50 × 75 × 35 mm. radial spherical plain bearing for oscillating motion, slow tilting and accommodation of angular misalignment. Seals on both sides help protect the sliding surfaces and retain lubricant.
Bearing - 6002 2RS FAG
15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 6000 2RSH SKF
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 626 2RS EU-ROLL
6 × 19 × 6 mm. Compact single-row deep groove ball bearing with contact rubber seals on both sides, helping protect the lubricant and bearing interior from contaminants.
Bearing - 6202 2RS C3 SKF
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Needle roller bearing - HK 1210 CX
HK1210 CX needle roller and cage assembly without seal, 12 × 16 × 10 mm, weight 0.0044 kg.
Bearing - 624 ZKL
4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6004 ZKL
20 × 42 × 12 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - 6412A MA C3 ZKL
60 × 150 × 35 mm. Bearing with increased radial internal clearance C3.
Bearing - 6002 2Z C3 ZKL
15 × 32 × 9 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.
Bearing - 6003 Z ZKL
17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |