Bearing - NA 6911 NKE

35x53.6x12.8 mm

Special single-direction thrust ball bearing 511Z35 ZKL for axial load in one direction. Separable design with a shaft washer, housing washer and ball-and-cage assembly; compare the full designation and dimensions before replacement.

30x72x19 mm

1306 MGM double-row self-aligning ball bearing with a cylindrical bore aligns itself against the spherical raceway of the outer ring. It is suitable for arrangements where slight shaft-to-housing misalignment or shaft deflection may occur.

20x47x14 mm
Higher accuracy class P4

High-precision spindle ball bearing S 6204 C TA P4 GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C TA P4 design, pairing and required preload must be preserved when replacing it.

75x130x25 mm

Single-row cylindrical roller bearing NU 215 ZKL for high radial loads and accurate shaft guidance. The NU design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

25x52x18 mm

2205 E 2RS1TN9 SKF double-row self-aligning ball bearing with a cylindrical bore accommodates slight misalignment and shaft deflection. Contact seals on both sides (2RS1) protect the internal components and help retain lubricant.

60x110x22 mm

Double-row self-aligning ball bearing 1212 K ZKL with a 1:12 tapered bore. Accommodates moderate angular misalignment and shaft deflection; suitable primarily for radial load and limited axial load in both directions.

30x72x19 mm

Single-row cylindrical roller bearing NJ 306 FRB for high radial loads and axial location in one direction. The NJ design permits axial displacement of the shaft relative to the housing in the opposite direction; when replacing, compare the complete designation and required internal clearance.

20x52x22 mm
Greater radial internal clearance

Double-row angular-contact ball bearing 3304 C3 ZKL for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.

25x62x17 mm

Single-row cylindrical roller bearing N 305 ZKL for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

40x62x22 mm

Single-row cylindrical roller bearing NU 4908 DKF for high radial loads and free axial displacement of the shaft relative to the housing in both directions. The NU design has two guiding flanges on the outer ring and a flange-free inner ring.