Bearing - NJ 207 ZKL
Product detailed description
NJ 207 ZKL is a single-row cylindrical roller bearing with dimensions 35 × 72 × 17 mm. Line contact between the rollers and raceways provides greater radial load capacity and rigidity than a comparably sized ball bearing.
Key features
- bore diameter: 35 mm
- outside diameter: 72 mm
- width: 17 mm
- NJ design: two flanges on the outer ring and one on the inner ring
- separable construction for easier installation
- manufacturer / brand: ZKL
Loads and applications
The bearing is intended primarily for high radial loading. Its flange guidance permits limited axial load in one direction, while allowing the shaft to move axially relative to the housing in the other direction. Typical uses include gearboxes, electric motors, pumps, machine tools and other industrial machinery.
Selection and installation
The separable design allows the rings to be fitted independently but requires careful alignment, cleanliness and correct lubrication. Apply installation force only through the ring being fitted. Before ordering, verify the dimensions, NJ arrangement, radial clearance, cage, speed and required direction of axial location for the machine design.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |