Bearing - NJ 208 FRB

30x62x21.25 mm
ZKL 32206 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.

10x26x8 mm
KINEX 6000 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

15x32x9 mm

Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.

30x47x13 mm
Special INA FE04-224.61906 single-row deep groove ball bearing with contact rubber seals on both sides. Mass 0.073 kg.

30x49.25x13.6 mm

ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.

25 × 52 × 31 mm

SKF YET 205 insert bearing with an eccentric locking collar and a narrow inner ring. It is designed for installation in a matching bearing housing and for locking onto a 25 mm shaft.

40x80x18 mm
DPI 6208 single-row deep-groove ball bearing for reliable radial-load support together with limited axial loads in both directions.

10x19x7 mm
Compact SKF 63800 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contaminants.

35x72x17 mm

Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.

40x90x25.25 mm

ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

65x100x18 mm
ZKL 6013 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.

56x85x40 mm
neu GE 56 radial spherical plain bearing for oscillating and tilting motion at low sliding speeds. Its spherical sliding surfaces carry radial load and accommodate angular misalignment between the shaft and housing.