Bearing - NKI 25/30 A FAG

30x62x16 mm

NUP 206 E ZVL single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.

35x72x42.9 mm

Radial insert ball bearing GYE 35 KRR B INA with a spherical outside surface, extended inner ring and locking by grub screws. Seals on both sides protect the rolling contact; the bearing is designed for installation in a matching bearing housing.

95x170x45.5 mm

Single-row tapered roller bearing 32219 E ZKL for high radial loads and axial load in one direction. The separable design simplifies mounting; the E suffix is part of the exact designation and must match the equipment documentation when replacing the bearing.

35x72x17 mm

Single-row cylindrical roller bearing N 207 ZKL for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

Rubber seals on both sides
Greater radial internal clearance
FAG 3004 2RS C3 bearing with precisely stated execution.

28x58x16 mm

Single-row deep-groove ball bearing 62/28 FBJ JAPAN with a special 28 mm bore for radial and axial loads in both directions. The open design allows lubrication to be selected for the application; when replacing, compare the complete designation, dimensions and required clearance.

35x100x25 mm

Single-row cylindrical roller bearing NJ 407 ZKL for high radial loads with axial shaft location in one direction. The NJ design permits axial displacement in the opposite direction; when replacing, compare the complete designation and required internal clearance.