Bearing - NU 209 FEMINA

Bearing - 3204 BD XL 2HRS TVH FAG

FAG 3204-BD-XL-2HRS-TVH – double-row angular contact ball bearing, seals on both sides; d=20 mm; D=47 mm; B=20.6 mm; m≈0.149 kg; 2HRS; TVH; PA66.

Bearing - ALS9 SKF

SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 61811 2RSY FAG

FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - HR32307C 5 11 NSK

35 × 80 × 32.75 mm. NSK bearing with designation HR32307C 5 11. Before ordering, compare the full designation and execution with the original part used in your equipment.

Bearing - 32210 A TPS

Ložisko TPS s úplným označením. Before ordering, compare the full designation and execution with the part used in your equipment.

Bearing - 2207 ZKL

35 × 72 × 23 mm. Double-row self-aligning ball bearing with a cylindrical bore. The spherical outer-ring raceway accommodates angular misalignment; suitable primarily for radial load and limited axial load in both directions.

Bearing - AM35 INA

INA bearing with designation AM35. Before ordering, compare the full designation and execution with the original part used in your equipment.

Bearing - 22232-E1A-XL-K-M FAG

Spherical roller bearing X-life 160 × 290 × 80 mm W33 lubrication groove.

Bearing - BT1 0667 VE679 SKF

SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 7214 BGA SNR

70 × 125 × 24 mm. SNR bearing with designation 7214 BGA. Before ordering, compare the full designation and execution with the original part used in your equipment.

Bearing - 31311 MGM

MGM bearing with designation 31311. Before ordering, compare the full designation and execution with the original part used in your equipment.

Bearing - 1207 K KINEX

self-aligning ball bearing, tapered bore; use the matching adapter sleeve; d=35 mm; D=72 mm; B=17 mm; taper 1:12; Cr=15.8 kN; C0r=5.1 kN; ngrease=8500 min−1; noil=10000 min−1.