Bearing - NU 210 M HOFFMANN

Bearing - 203 KRR AH02 CRAFT

ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against CRAFT documentation and the requirements of the specific application. 16.2 × 40 × 18.3 mm.

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

Spherical plain bearing - GE 8 NEU

8 × 16 × 8 mm. spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against NEU documentation and the requirements of the specific application.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 6005 2Z DPI

25 × 47 × 12 mm. Single-row deep groove ball bearing, shielded on both sides (2Z).

Spherical plain bearing - GAKFL 6 PB ELGES

6 × 16 × 9 mm. spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

Bearing - NJ 304 E DPI

20 × 52 × 15 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - PLC 15 12 ZKL

35 × 68 × 37 mm. Sealed double-row angular-contact ball bearing by ZKL.

Bearing - YAT 205 SKF

25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

Bearing - 6207 ZKL

35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.

Spherical plain bearing - GAL 35 UK 2RS ELGES

with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.