Bearing - NU 214 EXLN1 MPAXC4 H144

Double-row tapered roller bearing assembly TIMKEN 07100S/07196D. d = 25.4 mm; D = 50.005 mm; T = 33.34 mm; C = 25.4 mm.

Precision bearings NSK 100BER10ETYNDBBELP4Y. Dimensions of this variant: unconfirmed.

Flanged outer ring for a tapered roller bearing TIMKEN 08231B. D = 58.738 mm; C = 10.716 mm. Separate tapered roller bearing component; not a complete bearing.

Pair of angular contact thrust ball bearings NSK 100BAX10TYDBLP4A. d = 100 mm; D = 150 mm; Overall assembly width = 45 mm.

Precision bearings NSK 100BAX10TYNDBLP. Dimensions of this variant: unconfirmed.

Bearing - 51105 KINEX

25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Single-row tapered roller bearing TIMKEN 09062/09196. d = 15.875 mm; D = 49.225 mm; T = 23.02 mm.

Tapered roller bearing assembly with flanged outer ring TIMKEN 07098-90114. Dimensions of this variant: unconfirmed.

Double-row tapered roller bearing assembly TIMKEN 08125-90055. Dimensions of this variant: unconfirmed.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6200 Z ZKL

10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.