Bearing - NU 2216 E XL N1 MPAX C4
Product detailed description
Bearing - NU 2216 E XL N1 MPAX C4
Bearing NU 2216 E XL N1 MPAX C4
Dimensions: 80 × 140 × 33 mm
Design: very increased radial internal clearance
The complete designation NU 2216 E XL N1 MPAX C4 identifies this product. When selecting a replacement, compare the designation, dimensions and required radial internal clearance with the original part or machine documentation. Use clean mounting practices and follow the equipment manufacturer’s installation and lubrication instructions.
Double-row tapered roller bearing assembly TIMKEN 07079-90100. Dimensions of this variant: unconfirmed.
Tapered roller bearing inner assembly (cone) TIMKEN 09076. d = 18.999 mm; B = 22.332 mm. Separate tapered roller bearing component; not a complete bearing.
TIMKEN 00050/00150 single-row tapered roller bearing assembly. Bore 12.7 mm, outside diameter 38.1 mm, overall width 13.495 mm.
Bearing - 6001 2RS SKF
12 × 28 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6202 2RS C3 SKF
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Tapered roller bearing outer ring TIMKEN 08237. D = 58.788 mm; C = 10.716 mm. Separate tapered roller bearing component; not a complete bearing.
Tapered roller bearing inner assembly (cone) TIMKEN 07096. d = 25.159 mm; B = 14.26 mm. Separate tapered roller bearing component; not a complete bearing.
Pair of angular contact thrust ball bearings NSK 100BAR10STYNDBLP4A. d = 100 mm; D = 150 mm; Overall assembly width 2B = 45 mm.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Single-row tapered roller bearing TIMKEN 07093/07205. d = 23.813 mm; D = 51.999 mm; T = 15.011 mm.
Double-row tapered roller bearing assembly TIMKEN 05062/05185D. d = 15.875 mm; D = 47 mm; T = 31.747 mm; C = 25.212 mm.
Single-row tapered roller bearing TIMKEN 07100/07205. d = 25.4 mm; D = 51.999 mm; T = 15.011 mm.
Pair of angular contact thrust ball bearings NSK 100BAR10ETYNDBELP4A. d = 100 mm; D = 150 mm; Overall assembly width 2B = 45 mm.
Precision bearings NSK 100BER10HTE34DD. Dimensions of this variant: unconfirmed.
Single-row tapered roller bearing TIMKEN 07093/07196. d = 23.813 mm; D = 50.005 mm; T = 13.495 mm.
Product rating
Be the first who will post an article to this item!