Bearing - UC 208 BBC
Bearing - 6301 2RS KINEX
Bearing.
Bearing - 608 Z ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.
Bearing - YET 206 SKF
30 × 62 × 38.1 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - PLC 15 12 ZKL
35 × 68 × 37 mm. Sealed double-row angular-contact ball bearing by ZKL.
Bearing - 6201 2ZR ZKL
Bearing - is a single-row deep groove ball bearing with a cylindrical bore, standard steel cage and two metallic shields 2ZR. The shields adhere to the flat surface of the inner ring. Dimensions: inner diameter d 12 mm, outer diameter D 32 mm, width B 10 mm; weight 0.037 kg. The bearing has normal. Cn internal clearance, standard precision and standard lubrication. confirms no external….
Bearing - Q 310 DKF
Bearing.
Bearing - 608 2Z SKF
8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.
Bearing - B7213-E-T-P4S-UL FAG
Bearing.
Bearing - 7205 CTRDULP3 (2 páry) NSK
25 × 52 × 15 mm. Bearing 7205 CTRDULP3 (2 pairs) NSK.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - 61824 2RS Y INA
120 × 150 × 16 mm. 2RS rubber seals on both sides, Y pressed brass cage.
Bearing - PLC 23 5 ZKL
30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Bearing - 31307 A KINEX
Bearing.
Bearing - 30308 AJ2 ZKL
40 × 90 × 25.25 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
Bearing - 62206 2RS1 SKF
30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any BBC product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
BBC – product identification and supply
The BBC designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.