Bearing - VKBA3624 SKF

30x62x23 mm

3206 ZKL double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

25x33x20 mm

NK 25/20 INA needle roller bearing without an inner ring provides high radial load capacity within a very small cross-section. The needles run directly on a suitably hardened and ground 25 mm shaft raceway.

50x80x16 mm

6010 ZVL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

15x32x9 mm

6002 RS FLT single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side needs protection from dust, contamination and lubricant loss.

8x22x7 mm

608 ZKL single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Rubber seals on both sides

20x42x16 mm

3004 2RS C3 FAG double-row angular contact ball bearing for combined radial and axial loads in both directions. The C3 version has greater axial internal clearance than standard CN.

9x26x8 mm

629 ZKL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

20x32x7 mm

61804 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

34x64x37 mm

SKF 309726 DA compact double-row angular contact ball bearing, also listed under reference designation VKBC 20012. Intended for hub arrangements carrying combined radial and axial loads in both directions.

Metal shields on both sides

605 ZZ KINEX single-row deep groove ball bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of larger contaminants while adding very little friction.