NJ419M

Bearing - 6322/C3 SKF

110 × 240 × 50 mm. Single-row deep groove ball bearing 6322 C3 SKF with increased radial internal clearance C3.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 61901 2RS ZVL

12 × 24 × 6 mm. Rubber seals on both sides.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - YET 206 SKF

30 × 62 × 38.1 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Bearing - 6003 Z ZKL

17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.

Bearing - 30209 A KLF-ZVL

45 × 85 × 20.75 mm. tapered roller bearing for combined radial and axial loads.

Bearing - PLC 64 2 ZKL

Bearing.

Bearing - RNU 228 M (168 × 250 × 42 mm) NEU

168 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6200 Z ZKL

10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.