NU316ECM/C3

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 6004 2RS ZVL

20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 6201 ZKL

12 × 32 × 10 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 6200 Z ZKL

10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

Bearing - 61903 2RS ZVL

17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.

Bearing - 6322 FAG

110 × 240 × 50 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6407 SKF

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6306 TB FAG

30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 609 2Z ZKL

9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.