Bearings, Page 105
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Rubber seals on both sides
Rubber seals on both sides
Rubber seals on both sides
15x32x8 mm
ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
40x80x23 mm
Bearing 22208 M ZKL for industrial rotating assemblies. Before selecting, verify the full designation, dimensions, and requirements of the specific application.
35 × 72 × 23 mm
Lubrication groove and lubrication holes in the outer ring
200x360x98 mm
Bearing 22240 KM GPZ for industrial rotating assemblies. Before selection, verify the complete designation, dimensions and requirements of the specific application.
50x70x14 mm
ZKL 51110 P6 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
50x70x14 mm
ZKL 51110 P5 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
ZKLF50115-2RS-XL INA
double-direction angular-contact thrust ball bearing
50 × 115 × 34 mm
P plastic cage, P4 precision
2RS rubber seals on both sides
ZARN60120-TV-A INA is a combined INA bearing designed for applications requiring reliable radial and axial load capacity.
- Bore d: 60 mm
- Outside diameter D: 105 mm
- Width B: 82 mm
- Flange diameter D1: 120 mm
- Polyamide cage, without seal
- Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N
- Speed: 950 rpm with grease, 2,700 rpm with oil
Do not confuse the bearing outside diameter D with the flange diameter D1.
23230 M
Rolling bearing for industrial use.