Bearings, Page 172
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
HY S 6013 GMN
GMN bearing with the complete designation HY S 6013 GMN. When selecting a replacement, compare the full designation, dimensions and design required for the application.
30 × 37 × 18 mm
INA needle roller bearing HK 3018 2RS for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part.
Confirm compatibility using manufacturer documentation and the requirements of the specific application.
22 × 28 × 16 mm
ZKL HK 2216 needle roller bearing for replacement use. Dimensions d × D × B: 22 × 28 × 16 mm.
Before ordering, compare the complete designation HK 2216 ZKL, dimensions and design with the original part.
18 × 24 × 12 mm
HK 1812 CRB
CRB HK 1812 needle roller bearing for replacement use. Dimensions d × D × B: 18 × 24 × 12 mm.
Before ordering, compare the complete designation HK 1812 CRB, dimensions and design with the original part.
15 × 21 × 16 mm
2RS – rubber seal on both sides
14 × 20 × 12 mm
HK 1412 NTN
NTN needle roller bearing HK 1412 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part.
Confirm compatibility using manufacturer documentation and the requirements of the specific application.
12 × 18 × 14 mm
2RS – rubber seals on both sides
8x12x10 mm
HK 0810 INA is a drawn-cup needle roller bearing with open ends. Its compact cross-section provides high radial load carrying capacity and stiffness; it is not intended to support axial load.
The bearing has no separate inner ring, so a suitably hardened and ground shaft surface normally forms the raceway. Correct shaft quality, housing fit and lubrication are essential for service life.
Rubber seals on both sides
GB1412 Torrington needle roller and cage assembly without seal, weight 0.028 kg.
GAL 35 UK 2RS ELGES
ELGES GAL 35 UK 2RS with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part.
Confirm compatibility against ELGES documentation and the requirements of the specific application.
Machined brass cage
