Bearings, Page 2
Product sorting
List of products
50x70x14 mm
ZKL 51110 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
20x47x14 mm
6204 2ZNR SKF deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial retention in the housing.
35x62x14 mm
6007 2RS ZVL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
6204 C3 KINEX deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.
7204 AA ZKL single-row angular-contact ball bearing is designed for combined radial and axial loads. Under the ZKL designation system, the AA execution has a 26° contact angle and carries axial load in one direction.
20x47x14 mm
Higher accuracy class P4
High-precision spindle ball bearing S 6204 C TA P4 GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C TA P4 design, pairing and required preload must be preserved when replacing it.
17x47x14 mm
Single-row deep groove ball bearing 6303 Z SRO with a non-contact metal shield on one side. A versatile design for radial loads and light axial loads in both directions, offering low friction and good speed capability.
Rubber seals on both sides
Rubber seals on both sides
Rubber seals on both sides
20x47x14 mm
CT 1204 MGK self-aligning ball bearing with two rows of balls compensates minor shaft-to-housing misalignment. The MGK suffix is part of the full designation, which should always be compared when selecting a bearing.
Metal shields on both sides
20x47x14 mm
ZKL 1204 self-aligning ball bearing with two rows of balls compensates minor shaft-to-housing misalignment. It is intended mainly for radial loads and limited axial loads in both directions. The K suffix is part of the full designation, which should always be compared when selecting a bearing.
Rubber seals on both sides
Greater radial internal clearance
