Bearings, Page 254
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Bearing - 6203 2Z MGM
17 × 40 × 12 mm. Metal shields on both sides.
Bearing - 6203 2Z DPI
17 × 40 × 12 mm. Metal shields on both sides.
Bearing - 6200 2ZR ZKL
10 × 30 × 9 mm. Deep groove ball bearing, shielded on both sides (2Z).
Bearing - 61807 2RS1 SKF
35 × 47 × 7 mm. Rubber seals on both sides.
Bearing - 6011 2NSL NACHI
55 × 90 × 18 mm. Single-row deep-groove ball bearing with contact seals on both sides. Verify suitability by the complete designation and application. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.
Bearing - 6007 2Z P6 ZKL
35 × 62 × 14 mm. Metal shields on both sides. Higher accuracy class P6.
Bearing - 6006 FAG
30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6006 2RS neu
30 × 55 × 13 mm. Single-row deep groove ball bearing, sealed on both sides (2RS).
Bearing - 51405 ZKL
25 × 60 × 24 mm. Before ordering, compare the complete designation with the original part and confirm the design in the manufacturer documentation.
Bearing - 51205 ZVL
25 × 47 × 15 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51201 neu
12 × 28 × 11 mm. neu 51201 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51113 ZKL
65 × 90 × 18 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51109 ZKL
45 × 65 × 14 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 32210 neu
50 × 90 × 24.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 32004 JR DPI
20 × 42 × 15 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 3200 FAG
10 × 30 × 14 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 3200 A 2Z TN9 MT33 SKF
10 × 30 × 14 mm. Metal shields on both sides. Injection moulded cage of glass fibre reinforced polyamide 66.