FBJ
We can arrange delivery of almost any FBJ product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
FBJ – product identification and supply
The FBJ designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6202 2RS FBJ JAPAN
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 608 2Z FBJ
8 × 22 × 7 mm. deep-groove ball bearing with metal shields on both sides.
Bearing - 6700 2Z (61700 2Z) FBJ
10 × 15 × 4 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 32011 FBJ
55 × 90 × 23 mm. The single-row tapered roller bearing is a separable bearing for combined radial and axial loads. Tapered raceways and rollers provide high rigidity and load-carrying capacity. One bearing supports axial load in one direction; an opposed pair is used for axial location in both directions. The open design requires suitable lubrication.
Bearing - 32208 FBJ
40 × 80 × 24.75 mm. tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.
UKP216 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: h = 88.9 mm; a = 292 mm; e = 232 mm; b = 78 mm; S1 = 25 mm; S2 = 28 mm
UKP215 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: h = 82.6 mm; a = 275 mm; e = 217 mm; b = 74 mm; S1 = 25 mm; S2 = 28 mm
UCT216 FBJ by FBJ: take-up bearing unit.
Dimensions according to drawing: Shaft diameter: 80 mm; O = 32 mm; q = 21 mm; p = 111 mm; g = 70 mm; S = 41 mm; b = 121 mm
UCT215 FBJ by FBJ: take-up bearing unit.
Dimensions according to drawing: Shaft diameter: 75 mm; O = 32 mm; q = 21 mm; p = 111 mm; g = 70 mm; S = 41 mm; b = 121 mm
UCP316 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 80 mm; h = 106 mm; a = 400 mm; e = 300 mm; b = 110 mm; S1 = 27 mm; S2 = 40 mm
UCP312 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 60 mm; h = 85 mm; a = 330 mm; e = 250 mm; b = 85 mm; S1 = 25 mm; S2 = 38 mm
UCP217 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 85 mm; h = 95.2 mm; a = 310 mm; e = 247 mm; b = 83 mm; S1 = 25 mm; S2 = 28 mm
UCP215-48 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 3 in; h = 82.6 mm; a = 275 mm; e = 217 mm; b = 74 mm; S1 = 25 mm; S2 = 28 mm
UCP214 FBJ by FBJ: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 70 mm; h = 79.4 mm; a = 266 mm; e = 210 mm; b = 72 mm; S1 = 25 mm; S2 = 28 mm
UCFL214 FBJ by FBJ: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 70 mm; B = 74.6 mm; a = 265 mm; e = 216 mm; i = 31 mm; g = 22 mm; l = 54 mm
UCFC214 FBJ by FBJ: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 70 mm; B = 74.6 mm; a = 215 mm; p = 177 mm; e = 125.1 mm; i = 17 mm; S = 19 mm
UCF312 FBJ by FBJ: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 60 mm; B = 71 mm; a = 195 mm; e = 150 mm; i = 33 mm; g = 22 mm; l = 56 mm