Bearing - 6000 C 2Z FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
6000 C 2Z FAG is a single-row radial ball bearing measuring 10 × 26 × 8 mm. It has non-contact metal shields on both sides, designated 2Z.
Construction and function
Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.
C identifies Generation C with a modified internal design developed for reduced noise and friction. It is not the radial clearance designation C3. This particular execution has a sheet steel cage.
Dimensions and design
- Designation: 6000 C 2Z FAG
- Type: Single-row deep groove ball bearing
- Closure: 2Z
- Bore diameter d: 10 mm
- Outside diameter D: 26 mm
- Width B: 8 mm
- Catalogue dimension r min.: 0.3 mm
- Basic dynamic load rating Cᵣ: 5.3 kN
- Basic static load rating C₀ᵣ: 1.97 kN
- Fatigue load limit Cᵤᵣ: 0.136 kN
- Reference speed: 30000 min⁻¹
- Limiting speed: 38000 min⁻¹
- Catalogue bearing mass: 0.019 kg
- Operating temperature: −20 to +120 °C
Reference speed is based on thermal conditions, while limiting speed reflects mechanical constraints. These are separate catalogue ratings; actual operating speed must be assessed with the lubrication, load and cooling conditions of the particular assembly.
What 2Z means
The suffix 2Z identifies metal shields on both sides. The shields do not contact the inner ring, helping to keep friction low. They retain grease and reduce the entry of contaminants, but do not make the bearing watertight. Assemblies exposed to splashing or heavy contamination require an assessment of additional external protection.
Lubrication and operation
The bearing is grease lubricated and has no relubrication feature. Leave the shields in place during normal installation and do not wash out the grease fill. Grease life depends on speed, temperature, load and cleanliness, so no universal operating interval can be stated.
Mounting and replacement selection
Before mounting, check the dimensions, condition and cleanliness of both the shaft and housing. Apply pressing force through the ring being fitted with interference, never through the balls, and protect the shields from damage.
Additional parameters
| Category: | Single row ball bearingsBearings 10 × 26 × 8 mm |
|---|---|
| Weight: | 0.019 kg |
| EAN: | 4012802573824 |
| Inner diameter d (mm): | 10 |
| Outer diameter D (mm): | 26 |
| Width (mm): | 8 |
| Designation: | 6000 C 2Z FAG |
| Type: | Single-row deep groove ball bearing |
| Closure: | 2Z |
| Bore diameter d: | 10 mm |
| Outside diameter D: | 26 mm |
| Width B: | 8 mm |
| Catalogue dimension r min.: | 0.3 mm |
| Basic dynamic load rating Cᵣ: | 5.3 kN |
| Basic static load rating C₀ᵣ: | 1.97 kN |
| Fatigue load limit Cᵤᵣ: | 0.136 kN |
| Reference speed: | 30000 min⁻¹ |
| Limiting speed: | 38000 min⁻¹ |
| Catalogue bearing mass: | 0.019 kg |
| Operating temperature: | −20 to +120 °C |
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |