Component - DSNU-32-25-P-A Festo
Related products
Product detailed description
POPIS V ANGLIČTINě
DSNU-32-25-P-A Festo Round cylinder
About the Range
Diameter 32, 40, 50, 63 mm
Stroke length 1 ... 500 mm
Force 406 ... 1870 N
Double-acting
Position sensing
Fixed/adjustable/self-adjusting cushioning
Female thread
Male thread
Mounting flange.
| Property | No |
| Product Type | Festo Round cylinder |
| Short type code | DSNU |
| Piston diameter | 32 mm |
| Stroke | 25 mm |
| Mounting | With accessories |
| Pneumatic connection | G1/8 |
| Cushioning | P: Flexible cushioning rings/plates at both ends |
| Piston rod thread | M10 x 1.25 |
| Ambient temp | -20 - 80 °C |
| Assembly position | Any |
| Based on the standard | ISO 15552 (previously also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) |
| Corrosion resistance classification CRC | 2 |
| Design structure | Cylinder barrel |
| Design structure | Piston |
| Design structure | Piston rod |
| Materials information for cover | Wrought Aluminium alloy |
| Materials information for cylinder barrel | High alloy steel, non-corrosive |
| Materials information for piston rod | High alloy steel |
| Materials information for seals | NBR |
| Materials information for seals | TPE-U(PU) |
| Mode of operation | double-acting |
| Moving Mass | 144 g |
| Operating medium | Dried compressed air, lubricated or unlubricated |
| Operating Pressure | 1 - 10 bar |
| Position detection | For proximity sensor |
| Product weight | 410 g |
| Theoretical force at 6 bar, advance stroke | 482.5 N |
| Theoretical force at 6 bar, return stroke | 415 N |
Additional parameters
| Category: | Pneumatic components |
|---|---|
| Weight: | 1 kg |
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any Festo product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
Festo – product identification and supply
The Festo designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Festo SE & Co. KG |
|---|---|
| Address : | Festo Campus 1, 73734 Esslingen, Germany |
| E-mail : | info_de@festo.com |