Bearings 15 × 35 × 11 mm

Bearing - 6202 2RS FAG

15 × 35 × 11 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.

Bearing - 6202 2RS C3 SKF

15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.

Bearing - 6202 2RS FBJ JAPAN

15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.

Bearing - 7202 AA ZKL

15 × 35 × 11 mm. single-row angular contact ball bearing for combined radial and axial loads. A single bearing carries axial load in one direction; a suitable paired arrangement is used when axial guidance is required in both directions.

Bearing - 6202 ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 6202 2RS P66 ZKL

15 × 35 × 11 mm. single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.

Bearing - 6202 2Z INA

15 × 35 × 11 mm. deep-groove ball bearing with metal shields on both sides.

Bearing - 6202 2Z FAG

15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.

Bearing - 6202 C3 FAG

15 × 35 × 11 mm. Greater C3 radial internal clearance. FAG single-row deep groove ball bearing for arrangements requiring increased internal clearance.

Bearing - 6202 FLT

15 × 35 × 11 mm. Open single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.

Bearing - 6202 2RS SS CX

15 × 35 × 11 mm. is a stainless-steel single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and common contaminants. The stainless-steel design provides improved corrosion resistance compared with standard bearing steel. Suitability for a specific chemical environment, temperature or water exposure must be….

Bearing - 1202 KINEX

15 × 35 × 11 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in KINEX documentation.  

Bearing - 6202 C 2HRS FAG

15 × 35 × 11 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6202 FAG

15 × 35 × 11 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.