Bearing - 7202 AA ZKL
Product detailed description
Bearing - 7202 AA ZKL
7202 AA ZKL is a single-row angular contact ball bearing with dimensions of 15 × 35 × 11 mm. Its raceway geometry enables simultaneous radial and axial load transmission, while a single bearing carries axial load in one direction. AA is part of the specific ZKL variant and must be retained or technically verified when selecting a replacement.
Key features
- Designation: 7202 AA ZKL
- Manufacturer: ZKL
- Dimensions: 15 × 35 × 11 mm (bore × outside diameter × width)
- Design: single-row angular contact ball bearing
- Loads: combined radial and axial load in one direction
- Version: AA suffix the manufacturer designation
Applications and benefits
The bearing is used in precise shaft arrangements, transmissions, spindles and other mechanisms that must carry radial and axial forces at the same time. Axial guidance in both directions, or a defined clearance or preload, requires a suitable paired arrangement.
Installation guidance
Observe the axial load direction and provide clean, aligned seats. Apply mounting force through the ring with the interference fit and never through the balls. Before ordering, compare the dimensions, the complete AA designation and the required bearing arrangement.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |