Bearings 30 × 55 × 13 mm

Bearing - 6006 2RS1 SKF

30 × 55 × 13 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 6006 ZKL

30 × 55 × 13 mm. Open single-row deep groove ball bearing. It primarily carries radial load and also limited axial loads in both directions; the open design provides direct access for lubrication and requires protection from the surrounding arrangement.

Bearing - 6006 2Z ZKL

30 × 55 × 13 mm. single-row deep-groove ball bearing with metal shields on both sides. For radial loads and limited axial loads in either direction.

Bearing - 6006 ZVL

30 × 55 × 13 mm. single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 13.24 kN, mass 0.111 kg.

Bearing - 6006 2Z C3 ZVL

30 × 55 × 13 mm. Deep groove ball bearing is a single-row bearing with metal shields on both sides and C3 radial internal clearance. It accommodates radial loads and moderate axial loads in both directions. The non-contact 2Z shields limit contaminant ingress while maintaining low friction. C3 clearance is greater than. Normal and must suit the temperature, speed and fit; it is not an automatic substitute….

Bearing - 6006 2ZR FAG

30 × 55 × 13 mm. Metal shields on both sides.