35 80 21
Product sorting
List of products
Bearing - 6307 2RS1 SKF
35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - 6307 ZKL
35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6307 2RS SKF
35 × 80 × 21 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
Bearing - 6307 2RS ZKL
35 × 80 × 21 mm. single-row deep-groove ball bearing with rubber seals on both sides for reliable operation and protection of the lubricant from contamination.
Bearing - 6307 2RS CX
35 × 80 × 21 mm. Rubber seals on both sides.
Bearing - NJ 307 URB
35 × 80 × 21 mm. single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
Bearing - 6307 2RSR KINEX
35 × 80 × 21 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A dependable choice for radial and bidirectional axial loads where retaining lubricant and protecting the bearing interior from contamination are important.
Bearing - 6307 Z ZKL
35 × 80 × 21 mm. deep groove ball bearing has a non-contact metal shield on one side. The shield limits the ingress of larger contaminants and lubricant loss while retaining low friction; the opposite side remains open.
Bearing - 6307 2RS C3 ZKL
35 × 80 × 21 mm. Rubber seals on both sides. Greater radial internal clearance.
Bearing - 6307 ZC3 ZKL
35 × 80 × 21 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NJ 307 ZKL
35 × 80 × 21 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 1307 FLT
35 × 80 × 21 mm. FLT bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6307 C3 ZKL
35 × 80 × 21 mm. Greater radial internal clearance.
Bearing - 6307 P6 ZKL
35 × 80 × 21 mm. Higher accuracy class P6.
