Bearings 50 × 90 × 20 mm

Bearing - 6210 ZKL

50 × 90 × 20 mm. single-row deep-groove ball bearing in an open design, with no sealing or clearance suffix shown in the designation.

Bearing - 1210 K ZKL

50 × 90 × 20 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6210 2Z P6 ZKL

50 × 90 × 20 mm. The deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. The shields help retain lubricant and restrict common contaminants while maintaining low running friction. Suitable for electric motors, fans, pumps, gearboxes, conveyors and other rotating equipment. The 2Z suffix denotes two metal shields; the bearing is not watertight. Accuracy….

Bearing - 6210 2RSR ZVL

50 × 90 × 20 mm. Rubber seals on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.

Bearing - 6210 Z ZKL

50 × 90 × 20 mm. Metal shield on one side.

Bearing - 6210 2Z ZKL

50 × 90 × 20 mm. Metal shields on both sides.

Bearing - 6210 N ZKL

50 × 90 × 20 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6210 P6 ZKL

50 × 90 × 20 mm. Higher accuracy class P6.

Bearing - 6210 M C3 FAG

50 × 90 × 20 mm. Greater radial internal clearance.