Bearing unit - F11208 FAG

UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.

d 20 × a 86 × e 64 × i 15 × g 12 × l 25,5 × s 12 × z 33,3 × B 31 × n 12,7 mm
F 204 CRAFT is a cast-iron four-bolt flange housing for a UCF 204 bearing unit with a UC 204 insert and M10 mounting thread.

d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC

P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.

d 35 × H 47,6 × L 167 × J 127 × A 48 mm | S1 17 × S2 20 mm
UCP 207 MTM is a cast-iron pillow block unit for a 35 mm shaft with a self-aligning UC 207 insert bearing and two set screws for shaft locking.

UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).

FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.

UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.

TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.