Bearing unit - FC 213 ASAHI
Related products
UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).
UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.
d 20 × a 86 × e 64 × i 15 × g 12 × l 25,5 × s 12 × z 33,3 × B 31 × n 12,7 mm
F 204 CRAFT is a cast-iron four-bolt flange housing for a UCF 204 bearing unit with a UC 204 insert and M10 mounting thread.
UCF 206 CN – d = 30 mm; L = 108 mm; J = 83 mm; B = 38.1 mm.
UCP 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.
PFT 52 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_PFT52Oval flanged pressed-steel SKF PFT 52 housing for an insert bearing; H 95 mm, L 71 mm, J 76.2 mm, hole N 8.7 mm. Insert bearing not included.
Product detailed description
FC 213 ASAHI
FC 213 ASAHI is a cast-iron round flanged bearing-unit housing with a spigot for accurate positioning in the mounting plate. The standard UCFC 213 assembly combines it with a self-aligning UC 213 insert bearing for a 65 mm shaft; the insert is secured to the shaft by set screws. Verified dimensions are d = 65 mm, overall length L = 205 mm, mounting-hole pitch J = 170 mm, spigot dimension J1 = 120.2 mm, spigot height H3 = 145 mm, dimension A = 50 mm, A1 = 36 mm, A2 = 16 mm, A3 = 14 mm, A4 = 55.7 mm, A0 = 69.7 mm, insert width B = 65.1 mm, dimension S = 25.4 mm and mounting holes N = 19 mm. The fixing bolts are M16, the grease nipple thread is R1/8 and the ASAHI catalogue mass is approximately 5.11 kg. Before ordering, compare the FC 213 designation, shaft diameter, round flanged housing with spigot and mounting-plate dimensions with the original part or technical documentation.
UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.
80 × 102 × 38.5 mm
SKF FYTB 508 M separate two-bolt oval flanged cast iron housing for an insert bearing; the insert bearing is not included.
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ASAHI product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ASAHI – product identification and supply
The ASAHI designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.