Bearing unit - FNL 520 B SKF
Related products
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.
UCF 208 MSC
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Four-bolt square flanged UCF 208 MSC unit for a 40 mm shaft; standard spacing J=102 mm, length L=130 mm and M14 mounting. Verify variant dimensions against the marking.
UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).
UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.
Product detailed description
No product's description available
Additional parameters
| Category: | Bearing housings |
|---|---|
| EAN: | 7316572868850 |
PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.
UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.
PFT 20 TF SKF
Two-hole oval flanged bearing unit with pressed-steel housing for a 20 mm shaft; H 91 mm, L 91 mm, J 71.4 mm, mounting hole N 8.7 mm.
PFT20_TECH_NOTEH 91 mm, L 91 mm, J 71.4 mm, hole N 8.7 mm, bearing bore d 20 mm.
d 20 × a 86 × e 64 × i 15 × g 12 × l 25,5 × s 12 × z 33,3 × B 31 × n 12,7 mm
F 204 CRAFT is a cast-iron four-bolt flange housing for a UCF 204 bearing unit with a UC 204 insert and M10 mounting thread.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
d 12 × H 30,2 × L 127 × A 38 × J 95 mm | N 13 × N1 18 mm
UCP 201 MTM is a cast-iron pillow block bearing unit for a 12 mm shaft with a UC 201 self-aligning insert bearing, grease nipple and two set screws.
The HFH SNL 519-616 is a split plummer block housing designed to securely accommodate bearings, ensuring optimal performance and extended service life.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |