NP2.7/16
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPG30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
This KUVAL product carries the complete designation S 505. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPH30J515SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 15⁄16 in.; L = 201.7 mm; J = 24 mm; H = 85.9 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
Product detailed description
NP2.7/16 by RHP: pillow block bearing unit.
Technical specifications
- Designation: NP2.7/16
- Manufacturer: RHP
- Shaft diameter: 2 7/16 in
- L: 240.0 mm
- H: 69.90 mm
- H1: 26.3 mm
- H2: 142.3 mm
- J max: 201.0 mm
- J min: 176.0 mm
- G: 16 mm
- A: 70.0 mm
- Series: NP
- Housing material: cast iron
- Shaft locking: set-screw locking
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 5.9 kg |
| Délka základny domku (mm): | 240 |
| Shaft diameter (mm): | 61.9125 |
| Šířka ložiskové části jednotky (mm): | 65.099999999999994 |
| Šířka základny domku (mm): | 70 |
| Výška domku (mm): | 142.30000000000001 |
| Výška osy hřídele (mm): | 69.900000000000006 |
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
RASEY 25 XL N INA by INA: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; L = 130 mm; J = 103 mm; H = 36.5 mm; A = 36 mm; H1 = 14.5 mm; A1 = 21 mm
DV 308 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 308 A designation, mounting arrangement and bearing seat.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
QVCW28V415SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 4 15⁄16 in.; H = 26.2 mm; D = 266.7 mm; C = 190.0 mm; Sv = 147.8 mm
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.