QVVTU16V215SM
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
PCJT 20 INA is an oval flanged bearing unit for a 20 mm shaft, mounted by two bolts. It uses an eccentric locking collar to secure the shaft and has P seals.
UCF 210 MTM by MTM: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; a = 143 mm; e = 111 mm; i = 22 mm; g = 18 mm; l = 40 mm; S = 16 mm
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 210 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 210 A designation, mounting arrangement and bearing seat.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
Product detailed description
QVVTU16V215SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Technical specifications
- Designation: QVVTU16V215SM
- Manufacturer: Timken
- Shaft diameter: 2 15⁄16 in.
- P: 120.7 mm
- E: 150.9 mm
- J: 108.0 mm
- L: 219.7 mm
- S: 46.0 mm
- C: 25.4 mm
- G: 39.6 mm
- A: 76.2 mm
- N: 90.2 mm
- Rvv: 16.3 mm
- F: 39.6 mm
- D: 171.5 mm
- Housing material: cast steel
- Housing mounting: take-up arrangement
- Shaft locking: V-Lock; double nut
- Sealing: triple-lip seal (NBR)
- Axial arrangement: non-expansion arrangement
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 15.9 kg |
| Délka domku (mm): | 219.7 |
| Shaft diameter (mm): | 74.6125 |
| Šířka domku v ose hřídele (mm): | 90.2 |
| Výška domku (mm): | 171.5 |
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
UCP 213 DPI is a pillow-block bearing unit for a 65 mm shaft. Insert bearing: UC213; Housing: P213.
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
Product rating
Be the first who will post an article to this item!
We can source almost any TIMKEN product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about TIMKEN productsTIMKEN – Product range and selection
The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.
Examples from our catalogue
- 32208 TIMKEN
- 22308 CJW33 TIMKEN
- 33014 M TIMKEN
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |