TSFT35DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.
UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
QMSN30J140SN by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 202 mm; J = 30 mm; H = 76 mm; A = 170 mm; B = 330 mm; K = 76 mm
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 213 DPI is a pillow-block bearing unit for a 65 mm shaft. Insert bearing: UC213; Housing: P213.
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
Product detailed description
TSFT35DEC by RHP: flange bearing unit.
Technical specifications
- Designation: TSFT35DEC
- Manufacturer: RHP
- Shaft diameter: 35 mm
- L: 95.5 mm
- H: 155.5 mm
- J: 130.00 mm
- G: 12 mm
- Series: SFT
- Housing material: cast iron
- Shaft locking: eccentric locking collar
- Sealing: triple-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 1.4 kg |
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
This KUVAL product carries the complete designation S 610. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 206 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm; b = 44 mm; S1 = 17 mm; S2 = 20 mm
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
QMPF30J600ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.