100BER10HTSRV1V

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 3206 ZKL

30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

Bearing - 6308 2RS ZVL

40 × 90 × 23 mm. Rubber seals on both sides.

Bearing - 6002 2RS FAG

15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6305 2Z C3 GJN SKF

25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.

Bearing - 609 2Z ZKL

9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

Bearing - 6306 Z ZKL

30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.