2MMV9104HXCRDUM

Bearing - B7006 E 2RSD T P4S UM FAG

30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 627 ZKL

7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 6322/C3 SKF

110 × 240 × 50 mm. Single-row deep groove ball bearing 6322 C3 SKF with increased radial internal clearance C3.

Bearing - 6308 2RS ZVL

40 × 90 × 23 mm. Rubber seals on both sides.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6215 2RS ZVL

75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.

Bearing - 6407 SKF

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 626 2Z FAG

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 6202 ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 6000 SKF

10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6407 N ZVL

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.