2MV9115WIPRLDUH

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6407 N ZVL

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 607 2Z EU

7 × 19 × 6 mm. Metal shields on both sides.

Bearing - 6202 2RS FBJ JAPAN

15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.

Bearing - 6200 2RS SKF

10 × 30 × 9 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.

Bearing - NJ 2311 M SRO

55 × 120 × 43 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6407 SKF

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 623 ZKL

3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.