31310/CL7CDF

Bearing - 6310 FAG

50 × 110 × 27 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 22313 M ZKL

65 × 140 × 48 mm. double-row spherical roller bearing with a solid machined brass cage. Its self-aligning design carries high radial loads, axial loads in both directions and accommodates operating misalignment.

Bearing - 23134 W33M ZKL

170 × 280 × 88 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 6000 SKF

10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

Bearing - 623 ZKL

3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.