Bearing - 6207 2RS SKF

15x35x11 mm
6202 2Z INA deep-groove ball bearing with metal shields on both sides.

20x52x16.25 mm
DPI 30304 single-row tapered roller bearing for combined radial and axial loads. The separable cone with rollers and outer-ring cup simplify mounting and precise clearance or preload adjustment.

20x52x15 mm
SKF 6304 2RS C3 single-row deep-groove ball bearing with rubber seals on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.

25x52x15 mm
Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.

17x35x10 mm
SKF 6003-2RSH/C3 single-row deep groove ball bearing with greater C3 radial internal clearance and NBR contact seals on both sides. It is grease filled and protected against contamination.

6x19x6 mm
Compact EU-ROLL 626 2RS single-row deep groove ball bearing with contact rubber seals on both sides, helping protect the lubricant and bearing interior from contaminants.

30x72x27 mm
ZKL 2306 double-row self-aligning ball bearing for arrangements with minor shaft-to-housing misalignment. Dynamic load rating 32.3 kN, mass 0.50 kg.

25x62x17 mm
ZKL NJ 305 NA P6 single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.

25x42x17 mm
DKF NU 4905 single-row cylindrical roller bearing in NU design for high radial loads. The outer ring has two integral flanges and the inner ring has no flanges, allowing axial displacement of the shaft relative to the housing in both directions.

65x100x18 mm
ZKL 6013 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.

20x42x12 mm
Single-row 6004 2RSH SKF deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.